|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
DISCRETE SEMICONDUCTORS DATA SHEET PESDxS2UAT series Double ESD protection diodes in SOT23 package Product specification 2004 Feb 18 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package FEATURES * Unidirectional ESD protection of up to two lines * Common-cathode configuration * Max. peak pulse power: Ppp = 330 W at tp = 8/20 s * Low clamping voltage: V(CL)R = 20 V at Ipp = 18 A * Ultra-low reverse leakage current: IRM < 700 nA * ESD protection > 30 kV * IEC 61000-4-2; level 4 (ESD) * IEC 61000-4-5 (surge); Ipp = 18 A at tp = 8/20 s. PINNING APPLICATIONS * Computers and peripherals * Communication systems * Audio and video equipment * Data lines * CAN bus protection. DESCRIPTION Unidirectional double ESD protection diodes in common cathode configuration in the SOT23 plastic package. Designed to protect up to two transmission or data lines against damage from ElectroStatic Discharge (ESD) and other transients. MARKING TYPE NUMBER PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT Note 1. * = p : made in Hong Kong. * = t : made in Malaysia. * = W : made in China. MARKING CODE(1) *7A *7B *7C *7D *7E 1 PESDxS2UAT series QUICK REFERENCE DATA SYMBOL VRWM Cd PARAMETER reverse stand-off voltage diode capacitance VR = 0 V; f = 1 MHz number of protected lines VALUE 3.3, 5, 12, 15 and 24 UNIT V 207, 152, 38, 32 pF and 23 2 PIN 1 2 3 anode 1 anode 2 DESCRIPTION common cathode 3 1 3 2 2 001aaa401 sym002 Fig.1 Simplified outline (SOT23) and symbol. 2004 Feb 18 2 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package ORDERING INFORMATION PACKAGE TYPE NUMBER NAME PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL Ppp PARAMETER peak pulse power PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT Ipp peak pulse current PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT Tj Tamb Tstg Notes 1. Non-repetitive current pulse 8/20 s exponential decay waveform; see Fig.2. 2. Measured across either pins 1 and 3 or pins 2 and 3. junction temperature operating ambient temperature storage temperature 8/20 s pulse; notes 1 and 2 CONDITIONS 8/20 s pulse; notes 1 and 2 - DESCRIPTION plastic surface mounted package; 3 leads PESDxS2UAT series VERSION SOT23 MIN. - - - - - - - - - - - -65 -65 MAX. 330 260 180 160 160 18 15 5 5 3 150 +150 +150 UNIT W W W W W A A A A A C C C 2004 Feb 18 3 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package ESD maximum ratings SYMBOL ESD PARAMETER electrostatic discharge CONDITIONS PESDxS2UAT series VALUE UNIT IEC 61000-4-2 (contact discharge); notes 1 and 2 PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT HBM MIL-Std 883 PESDxS2UAT-series 10 kV 30 30 30 30 23 kV kV kV kV kV Notes 1. Device stressed with ten non-repetitive ESD pulses; see Fig.3. 2. Measured from pin 1, 2, 3, 4, 5 or 8 to pin 6 or 7. ESD standards compliance ESD STANDARD IEC 61000-4-2; level 4 (ESD); see Fig.3 HBM MIL-Std 883; class 3 > 4 kV CONDITIONS > 15 kV (air); > 8 kV (contact) 001aaa191 handbook, halfpage 120 MLE218 Ipp 100 % 90 % Ipp (%) 100 % Ipp; 8 s 80 e-t 50 % Ipp; 20 s 40 10 % 0 0 10 20 30 t (s) 40 tr = 0.7 to 1 ns 30 ns 60 ns t Fig.2 8/20 s pulse waveform according to IEC 61000-4-5. Fig.3 ElectroStatic Discharge (ESD) pulse waveform according to IEC 61000-4-2. 2004 Feb 18 4 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package ELECTRICAL CHARACTERISTICS Tj = 25 C; unless otherwise specified. SYMBOL VRWM PARAMETER reverse stand-off voltage PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT IRM reverse leakage current PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT VBR breakdown voltage PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT Cd diode capacitance PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT V(CL)R clamping voltage PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT notes 1 and 2 Ipp = 1 A Ipp = 18 A Ipp = 1 A Ipp = 15 A Ipp = 1 A Ipp = 5 A Ipp = 1 A Ipp = 5 A Ipp = 1 A Ipp = 3 A - - - - - - - - - - f = 1 MHz; VR = 0 V - - - - - VRWM = 3.3 V VRWM = 5 V VRWM = 12 V VRWM = 15 V VRWM = 24 V IZ = 5 mA 5.2 6.4 14.7 17.6 26.5 - - - - - - - - - - CONDITIONS PESDxS2UAT series MIN. - - - - - TYP. MAX. 3.3 5 12 15 24 2 1 50 50 50 6.0 7.2 15.3 18.4 27.5 300 200 75 70 50 7 20 9 20 19 35 23 40 36 70 UNIT V V V V V A A nA nA nA V V V V V pF pF pF pF pF V V V V V V V V V V 0.7 0.1 <1 <1 <1 5.6 6.8 15.0 18.0 27.0 207 152 38 32 23 - - - - - - - - - - 2004 Feb 18 5 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package SYMBOL Rdiff PARAMETER differential resistance PESD3V3S2UAT PESD5V0S2UAT PESD12VS2UAT PESD15VS2UAT PESD24VS2UAT Notes 1. Non-repetitive current pulse 8/20 s exponential decay waveform; see Fig.2. 2. Measured either across pins 1 and 3 or pins 2 and 3. GRAPHICAL DATA IR = 1 mA IR = 1 mA IR = 1 mA IR = 1 mA IR = 0.5 mA - - - - - CONDITIONS PESDxS2UAT series MIN. - - - - - TYP. MAX. 400 80 200 225 300 UNIT 104 Ppp (W) 103 001aaa147 1.2 Ppp Ppp(25C) 0.8 001aaa193 (1) 102 (2) 0.4 10 1 10 102 103 tp (s) 104 0 0 50 100 150 Tj (C) 200 (1) PESD3V3S2UAT and PESD5V0S2UAT. (2) PESD12VS2UAT, PESD15VS2UAT, PESD24VS2UAT Tamb = 25 C. tp = 8/20 s exponential decay waveform; see Fig.2. Fig.5 Fig.4 Peak pulse power dissipation as a function of pulse time; typical values. Relative variation of peak pulse power as a function of junction temperature; typical values. 2004 Feb 18 6 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package PESDxS2UAT series 240 Cd (pF) 200 001aaa148 50 Cd (pF) 40 001aaa149 160 (1) 30 120 (2) 20 (1) (2) 80 10 (3) 40 0 1 2 3 4 VR (V) 5 0 0 5 10 15 20 VR (V) 25 (1) PESD3V3S2UAT; VRWM = 3.3 V. (2) PESD5V0S2UAT; VRWM = 5 V. Tamb = 25 C; f = 1 MHz. (1) PESD12VS2UAT; VRWM = 12 V. (2) PESD15VS2UAT; VRWM = 15 V. (3) PESD24VS2UAT; VRWM = 24 V. Tamb = 25 C; f = 1 MHz. Fig.6 Diode capacitance as a function of reverse voltage; typical values. Fig.7 Diode capacitance as a function of reverse voltage; typical values. 2004 Feb 18 7 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package PESDxS2UAT series 10 001aaa270 IR IR(25C) (1) 1 10-1 -100 -50 0 50 100 Tj (C) 150 (1) PESD3V3S2UAT; VRWM = 3.3 V. PESD5V0S2UAT; VRWM = 5 V. IR is less than 10 nA at 150 C for: PESD12V52UAT; VRWM = 12 V. PESD15VS2UAT; VRWM = 15 V. PESD24VS2UAT; VRWM = 24 V. Fig.8 Relative variation of reverse leakage current as a function of junction temperature; typical values. 2004 Feb 18 8 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package PESDxS2UAT series ESD TESTER RZ 450 RG 223/U 50 coax 10x ATTENUATOR 4 GHz DIGITAL OSCILLOSCOPE 50 CZ note 1 Note 1: IEC61000-4-2 network CZ = 150 pF; RZ = 330 D.U.T.: PESDxS2UAT vertical scale = 200 V/div horizontal scale = 50 ns/div vertical scale = 20 V/div horizontal scale = 50 ns/div PESD24VS2UAT GND PESD15VS2UAT GND GND PESD12VS2UAT GND GND GND unclamped +1 kV ESD voltage waveform (IEC61000-4-2 network) PESD5V0S2L PESD3V3S2UAT clamped +1 kV ESD voltage waveform (IEC61000-4-2 network) GND GND vertical scale = 200 V/div horizontal scale = 50 ns/div unclamped -1 kV ESD voltage waveform (IEC61000-4-2 network) vertical scale = 10 V/div horizontal scale = 50 ns/div clamped -1 kV ESD voltage waveform (IEC61000-4-2 network) 001aaa151 Fig.9 ESD clamping test set-up and waveforms. 2004 Feb 18 9 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package APPLICATION INFORMATION PESDxS2UAT series The PESDxS2UAT series can protect up to two lines against damage caused by unidirectional ElectroStatic Discharge (ESD) and surge pulses. The PESDxS2UAT series can protect lines whose signal polarities are below ground. PESDxS2UAT series provide a surge capability of up to 330 Watts peak pulse power per line for a 8/20 s waveform. line 1 to be protected line 2 to be protected line 1 to be protected PESDxS2UAT ground PESDxS2UAT ground unidirectional protection of two lines bidirectional protection of one line 001aaa179 Fig.10 Typical application: ESD protection of data lines. Circuit board layout and protection device placement Circuit board layout is critical for the suppression of ESD, Electrical Fast Transient (EFT) and surge transients. The following guidelines are recommended: 1. Place the PESDxS2UAT as close as possible to the input terminal or connector. 2. Minimize the path length between the PESDxS2UAT and the protected line. 3. Keep parallel signal paths to a minimum. 4. Avoid running protected conductors in parallel with unprotected conductors. 5. Minimize all printed-circuit board conductive loops including power and ground loops. 6. Minimize the length of transient return paths to ground. 7. Avoid using shared transient return paths to a common ground point. 8. Ground planes should be used whenever possible. 9. Use vias for multi-layer printed-circuit boards. 2004 Feb 18 10 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package PACKAGE OUTLINE Plastic surface mounted package; 3 leads PESDxS2UAT series SOT23 D B E A X HE vMA 3 Q A A1 1 e1 e bp 2 wMB detail X Lp c 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.9 A1 max. 0.1 bp 0.48 0.38 c 0.15 0.09 D 3.0 2.8 E 1.4 1.2 e 1.9 e1 0.95 HE 2.5 2.1 Lp 0.45 0.15 Q 0.55 0.45 v 0.2 w 0.1 OUTLINE VERSION SOT23 REFERENCES IEC JEDEC TO-236AB EIAJ EUROPEAN PROJECTION ISSUE DATE 97-02-28 99-09-13 2004 Feb 18 11 Philips Semiconductors Product specification Double ESD protection diodes in SOT23 package DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development PESDxS2UAT series DEFINITION This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). II Preliminary data Qualification III Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2004 Feb 18 12 Philips Semiconductors - a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. (c) Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R76/01/pp13 Date of release: 2004 Feb 18 Document order number: 9397 750 12247 |
Price & Availability of PESD3V3S2UAT |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |